EPS Panel
Dome construction using EPS panels
Dome construction using EPS panels
These pictures are taken at different stages of a dome construction showing us the flexibility of designing facility in using this technique.
Pre - Engineered Building Panel
Pre - Engineered Building Panel
A few pictures of completed projects using Pre Engineered EPS panels
QUIKBUILD — Modular Panels
QUIKBUILD — Modular Panels
The QuikBuild Construction System uses modular panels and accessories to build a frame for a structure. Concrete or Plaster is applied to these panels to finish the Structure.
The panels consist of
(1) Polystyrene Core
(2) Galvanised Wire Mesh – Two Outer Layer
(3) Galvanised Wire Trusses – Pierced through the Polystyrene Core and welded to each of the outer layer sheets of wire mesh.
Wall Panel
1. Various Mesh Configurations and Wire Diameters Available
2. Various Polystyrene Core Thickness Available
Roof Panel
1. Groove (Approx 2 deep) for MicroBeam (with or without steet rod)
2. Minimum Thickness of core in panel is 80mm Tongue and Groove joint also available at ends
SCIP Panel
Accessories
Construction Tools
Product Specification
QuikBuild panels are available in the following sizes:
Width – 1200 mm, Length – 2000 ~ 6000 mm
EPS Slab Thickness – 50, 80, 100, 120, 150 mm
EPS Slab Type – Plain or Corrugated
Mesh Spacing – 50 x 50 mm, 100 x 100 mm
Mesh Wire Thickness (dia) – 2-5 mm, 2.0 mm, 3.0 mm
Today's need for new Construction Technology
Today's need for new Construction Technology
Today’s construction industry is facing severe challenges in various aspect. These challenges are:
Technical Details
IIT-Chennai (Structural Engineering Lab) and BMTPC
Wall Panel
(2.5mm Wire, 50x50mm Mesh, 50mm EPS Panel + 1” plaster both sides)
Self Load — 120 kg/m2
Load Bearing – 350 KN/m
Plaster Ratio — 1% Coat 15mm of 1:2:3 (chips mix — 100% of size < 6mm)
2d Coat 10mm of 1:5 (Cement/Sand only)
Roof Panel
(2.5mm Wire, 50x50mm Mesh, 80mm EPS Panel + 1” plaster + 3” concrete))
Self Load — 580 kg/m2
Load Bearing – 10 KN/m
Concrete Ratio — 1:2:4 (Chips mix – 50% of size < 18mm + 50% of size < 10mm)
Raw Materials
The main Raw materials for manufacture of Quikbuild panels are 1.High tensile galvanised steel wire and 2. Fire retardant Expanded Polystyrene foam.
Galvanised Steel
Specification:
1.Wire diameter :2.0 to 3.0mm
2.Tensile strength: 88 Kgs/mm2 +/- 10Kgs/mm2
3.Zinc coating :> 60 gms/sq.mtr
4.Steel spec: low carbon steel with Hot dipped Zinc coating.
Expanded Polystyrene Foam Board
Specification:
1.Density : 15 to 18 Kg/M3.
2.Grade: Fire Retardant.
3.Colour : Natural White.
4.Sheet thickness: 50 to 150mm
QUICK CONSTRUCTION SOLUTIONS
About
In present times the conventional civil construction of structures and buildings is becoming uneconomical and time consuming task.